I did exactly this with BirdNet-Go and my Unifi doorbell cam. Unifi exposes an RTSP feed for each camera so it was easy for the tool to just "listen" to the doorbell and start classifying.
I have a spare e-ink display and my next weekend project to follow onto this is to wire it up so it shows some faux "woodcut" images of birds detected, or something like that.
Heads up. I noticed the screenshot of your markdown card has an ASCII block that goes below the baseline. `U+2588` (Full block) tends to do that depending on a lot of things.
I made a change to the markdown card sometime ago that uses only `U+2581` through `U+ 2587` instead to avoid that issue.
Nice! I've tried to build something similar with Unifi cameras (https://github.com/dewey/birdhomie) and it worked pretty well, the species detection wasn't that accurate but I'll continue on that project in the winter.
I'm also working on a little project that is a walnut frame with a waveshare eink display and esp32 that polls for latest detection and display the picture.
I’m at a very steady state now years into running a BirdNET-GO instance. Disclaimer: I’m a contributor to the project.
I’m a pretty unhinged sorta engineer, so I actually recently created a 24/7 weather TV channel that combines real-time bird alerts, weather radar, timelapses and a sky cam feed (just a UniFi camera mounted on my home’s roof PV).
In the non-fucked up timeline where Hilary won in 2016, Flock cameras is a nationwide network of automatic bird identification cameras to track bird population and migration.
(i have a few https://www.birdweather.com/ devices strewn across North America and Europe because I am time poor and preferred a turnkey solution for those gifted to, but love the DIY efforts! no affiliation!)
I just used AI(antigravity with gemini 3.6 flash, but i'm sure many others would work) to implement this and integrate it with my security cameras after reading the blog post 26 minutes ago. I suspect the author did the same thing. I also had it steal the idea from the AvianVisitors link in this thread and it displays a generated collage of the recently detected birds.
I have a spare e-ink display and my next weekend project to follow onto this is to wire it up so it shows some faux "woodcut" images of birds detected, or something like that.
I made a change to the markdown card sometime ago that uses only `U+2581` through `U+ 2587` instead to avoid that issue.
It's under a collapsed block here:
https://www.kyleniewiada.org/blog/2025/05/backyard-bird-trac...
I like the idea of doing something with the timestamp of the recording, or highlighting new (or recently unheard) visitors.
https://alec.is/posts/building-a-solar-powered-bird-station/
I'm also working on a little project that is a walnut frame with a waveshare eink display and esp32 that polls for latest detection and display the picture.
I’m a pretty unhinged sorta engineer, so I actually recently created a 24/7 weather TV channel that combines real-time bird alerts, weather radar, timelapses and a sky cam feed (just a UniFi camera mounted on my home’s roof PV).
https://www.youtube.com/live/sAC3o6KW2N0
Watchable from every TV in the house and shows the birds photo and name when it hears one. Whole thing is a single cursed FFMPEG command.
> No cloud services. No API calls.
> No subscription fees. No terms of service changes. No company shutting down the service in two years.
(i have a few https://www.birdweather.com/ devices strewn across North America and Europe because I am time poor and preferred a turnkey solution for those gifted to, but love the DIY efforts! no affiliation!)
would have been a great Mr. Robot episode